En de eerste video van mijn appartement:
245 Newbury Street, Boston MA from Sander van de Graaf on Vimeo.
Ik heb ook even een set aangemaakt op flickr van mn foto’s.
En de eerste video van mijn appartement:
245 Newbury Street, Boston MA from Sander van de Graaf on Vimeo.
Ik heb ook even een set aangemaakt op flickr van mn foto’s.
Na het succes van de Hardy Release Parties in Nederland en België wordt het langzaam tijd om onze aandacht te gaan richten op de volgende parties …
De release van Intrepid Ibex staat gepland voor 30 Oktober. De parties zullen dus ergens half november plaatsvinden. Omdat het hier niet gaat om een LTS-versie gaan we niet een grootse releaseparty houden maar is het nu de bedoeling dat, zowel in Nederland als in België, plaatselijk kleine installparties gehouden worden. Bij een kleine party denken we in dit geval aan een party voor 25 tot 100 mensen. Die installparties zullen deze keer niet georganiseerd worden door de teamleden van Ubuntu-nl of Ubuntu-be maar door de community met onze steun.
We zien ons dan ook genoodzaakt om een beroep te doen op onze leden. Maar goed, met duizenden Ubuntero’s zou het theoretisch mogelijk moeten zijn op een paar plekken wat kleinere installparties te houden.
Wat willen we bereiken? Het ideale zou zijn indien elke provincie een release party zou hebben (uiteraard zal dit niet lukken maar is een streefdoel) We willen ook maximaal 1 party per provincie, indien er meer parties in dezelfde provincie dreigen door te gaan proberen we deze te bundelen tot 1 party.
Wat hebben we nodig? Een kleine gratis zaal voor 25 - 100 mensen. Deze zijn vaak beschikbaar bij scholen, computerclubs of andere verenigingen, ik denk bijvoorbeeld aan de locale LUG’s. Samenwerken met hun vereenvoudigd de taken. Ken je een computerclub of een linuxvereniging bij u in de buurt die over een zaaltje beschikt? Spreek hun erover aan, heel vaak willen ze graag samenwerken.
Internet aansluiting … Lijkt me logisch
Drank: Bakken bier en frisdrank, koffie, … In eigen beheer en betalend.
Sprekers: Lijkt ons niet nodig of gewenst wegens de kleinschaligheid. Tenzij 1 persoon om uitleg te geven over Ubuntu aan beginners en nieuwelingen.
Installatiestand: Dit wordt de basis van de party. Mensen helpen bij het installeren.
Demostand: Altijd mooi. Zeker doen.
Website: http://intrepid.releaseparty.be en http://intrepid.releaseparty.eu (nog niet actief) zullen ervoor gebruikt worden. Op deze sites verzamelen we alle info over de locale evenementen. Mensen die een party organiseren krijgen hierop 1 pagina waarover zij vrij kunnen beschikken en aanpassen.
Nog vragen? Shoot

Bijna is het zover, zaterdagochtend (08.30) gaat een lang gekoesterde droom van me in vervulling, en vertrek ik voor een 3 maanden lang avontuur naar Boston, woohoo!
Mijn appartement bevindt zich hier, in de wijk ‘Back Bay‘, waar zich voornamelijk hele mooie, oude Victoriaanse huizen bevinden.
245 Newbury Street
Boston, MA 02116
USA
De IDG vestiging waar ik kom te werken, ligt in Framingham, net buiten Boston. Ik ga me daar vooral technisch bezighouden met computerworld.com, cxo.com en infoworld.com, voornamelijk Business to Business gericht. Het is een trip van zo’n 18 mijl (30km), en duurt zo’n 30 minuten (maw: goed te doen). Die route ga ik al carpoolend met wat amerikaanse collega’s afleggen:
Ik neem uiteraard mijn camera mee, en ga dus zeer waarschijnlijk flink wat foto’s maken, ook mn videocamera gaat mee voor de nodige video’s.
En ik moet de foto van een van de appartementen gewoon nog een keer posten:

I while back, I rented Zelda (Twilight Princess) to install the megacool Wii Homebrew Channel using the Twilight Hack, which went just fine. At first sight, you don’t even notice it’s homebrew, the developers made a professional looking icon for the Wii main screen. Even the Homebrew Channel itself looks fairly professional. And best of all, it’s customizable through an XML file. And hell yeah, now I can play LucasArts’ Full Throttle on my Wii using a Wiimote…
So after much rejoicing, the following thing struck me: straightaway after the homebrew channel release, ROM emulators became available. I was quite disappointed by this. Making rom emulators publicly available as Wii Homebrew endangers the very existence of the Wii Homebrew Channel. Not only have we used the Wii in ways Nintendo did not intend, we are also giving Nintendo every reason to lash out at the Wii Homebrew Channel, as we are subverting their business model. Nintendo already failed at their first attempt to disable the Twilight hack. And they’ll probably try again… And again…
This is exactly the reason why they are reluctant to opening up their console for unlicensed third party developers.
Ik dacht dat ik voor die vraag een heel leven tijd zou krijgen. Op dit moment ben ik beeldend kunstenaar, (ir.) architect en open source ontwikkelaar.
Zo oud als Mark Shuttleworth.
Je kan me vaak vinden in irc op #debian-python of #ubuntu-motu.
Familie en vrienden zijn voor mij heel belangrijk. Ik hou enorm van koken en lekker eten, omdat dat nu eenmaal een van de meest directe vormen van genot is. Reizen is een andere passie van me. Vaak moet ik reizen voor mijn tentoonstellingen, wat altijd een boeiend contact oplevert met plaatselijke kunstenaars in bijvoorbeeld China, Indonesië, Frankrijk, Duitsland, Verenigde Staten, ...
Wie Ubuntu gebruikt en promoot, is onvermijdelijk al bezig om de wereld te veranderen. Ik ben hier geen uitzondering op. Het mooie van Ubuntu is dat het een reëel idealisme is. Het gaat (voor mij althans) niet om een boycot maar om het werken aan een lovenswaardig alternatief. Het idee dat software kennis die voor iedereen toegankelijk moet zijn, is een nobel streven.
In 2001 begon ik uit interesse een beetje met Linux te grasduinen. Eerst met Red Hat (Fedora bestond nog niet) en daarna met Suse. Alhoewel ik het er potentieel van inzag, was de overstap een sprong te ver. Omwille van mijn werkzaamheden als architect, was ik toen gebonden aan een fout besturingssysteem. Het stierf helaas een stille dood toen ik meer harde schijf ruimte op mijn laptop nodig had. Programmeren heeft me altijd geboeid, omdat het iets magisch heeft. Mijn voorkeur viel eerst op Lisp, omdat ik daarmee concepten zeer snel kon vertalen naar programma's. Voor mij is de snelheid van programmeren belangrijker dan de uitvoersnelheid van het programma. Helaas waren voor Lisp niet zoveel bibliotheken beschikbaar. Daarom werd ik stilaan verplicht het schip te verlaten en sprong ik aan boord van Python. Dat was een hele openbaring omdat ik plots al mijn gefragmenteerde kennis van scriptalen (lingo in Director, VisualLisp in AutoCAD, mel in Maya, ...) kon vervangen door een taal (PIL voor fotobewerking, pygame ipv Director, python in blender, enz...). Ik ontwikkelde ook mijn eigen dxf bibliotheek (SDXF) zodat ik niet langer aan AutoCAD was gebonden om CAD tekeningen te genereren. In de Python gemeenschap vielen veel lovende woorden over Ubuntu, zodat mijn nieuwsgierigheid geprikkeld werd. Op een bepaald moment had mijn vriendin had een laptop zonder cd-speler gekocht via Ebay. Daar bleek geen besturingssysteem op te zitten. Goedkoop leek op het eerste zicht duurkoop, tot ik Ubuntu een kans gaf. Ik was aangenaam verrast door de gebruiksvriendelijkheid en de mogelijkheden. Toen ik de Synaptic schatkist opende, werd ik betoverd door de de indrukwekkende rijkdom aan Python bibliotheken. Ik kon niet langer wachten om zelf ook over te schakelen.
Dat zal je mijn ouders moeten vragen. Zij hebben een naam gekozen, waar ik best blij mee ben. Dus voel ik geen noodzaak om het wiel heruit te vinden. Wat ik wel belangrijk vind, is dat ik voor de dagelijkse sleur van online activiteiten mijn achternaam achterwege laat. Als je online actief bent en niet oppast wordt je Google resultaten bedolven onder de 'spam' van irrelevante informatie. Ik ben voornamelijk actief als beeldend kunstenaar en heb er dus professioneel geen baat bij dat een geïnteresseerd publiek zich eerst moet waden door een jungle van bijvoorbeeld mijn forum posts.
Ik werk volledig digitaal. Computers zijn dus mijn werkslaafjes die ik dagelijks aan het werk zet. In uren is het vaak moeilijk uit te drukken, want ze zitten soms over te werken terwijl ik me in de kroeg amuseer. Wat me het meeste boeit is dat bepaalde ontwikkelingen (zoals virtualisatie, vpn, compiz, herdefiniëren van de zakelijke markt, ...) heel snel gaan andere dan weer te traag (zie volgende vraag).
Ik amuseer me wat dat betreft op verschillende manieren. Ik 'verkoop' cd's, schrijf open source software (SPE, Phatch, SDXF, ...) en vind het leuk om organisatoren van release parties een steuntje in de rug te geven door bijvoorbeeld de lezingenreeks op te nemen, sprekers te strikken (zoals Steve van Canonical) en er zelf iedereen Phatch door het strot te duwen met mijn presentatie. Ik ben nog altijd op zoek naar een legertje vrijwilligers om mee te helpen met video opnames tijdens release parties. De vorige presentaties zijn al bijna 1500 keer online bekeken! Dat is al een release party op zich. Dus meld je bij me aan, je werk zal bekeken worden!
Als besturingssysteem mis ik niet zoveel aan Ubuntu. Wat wezenlijk nog ontbreekt is gespecialiseerde software, die een zeer grote groep nodig heeft zoals boekhouding, video bewerking, CAD software, ... Het succes om andere mensen de stap naar Ubuntu te laten zetten, staat of valt daarmee. Zo heb ik een geïnteresseerde architect laten overschakelen, maar dat was achteraf gezien een vergissing. Omdat er nog geen professionele CAD software voor Ubuntu bestaat, zat hij uiteindelijk 90% van zijn tijd in een virtuele machine Windows te draaien. (Wat fotobewerking betreft, ben ik zelf zeer tevreden over Gimp.) Het probleem is dat voor dit soort gespecialiseerde, open source en vrije software waarschijnlijk een nieuw business model nodig is, dat zich nog niet heeft ontwikkeld. (Zelfs Canonical is bijvoorbeeld nog niet winstgevend, maar ik verwacht wel dat ze daarin zullen slagen net zoals Red Hat, Novell, IBM en vele andere.) Wat dit nieuw model zou kunnen zijn laat ik aan Uw fantasie over, maar het is slechts een kwestie van tijd.
Onder het publiek bevindt zich incognito Georges Le Gloupier, die jarenlang heeft uitgekeken en geoefend voor deze gelegenheid. Met een spectaculaire beweging werpt hij met twee armen tegelijk een kersentaart in zowel in het gezicht van Ballmer als van Steve. Ballmer, even rood als de kersen van woede, verliest zijn zelfbeheersing en gooit zijn stoel naar de dader. Stallman is aan het likkebaarden van zoveel lekkernij en vraagt om het recept van de taart.
Alles op zijn tijd, al sinds mijn geboorte.
KenSentMe omdat hij bijna dezelfde video camera heeft als ik.
Wat maak je voor video en nieuwe media werk en hoe gebruik je Ubuntu hierbij?
In the past, I’ve always avoided printing my own photo’s. I’ve always considered printers temperamental devices not really worth my time. Thus I’ve always sent my photo to be printed at online labs like foto.com. I’ve always been reasonably satisfied with their quality. And their prices are almost unbeatable, at 50 eurocents for a 30cm by 20cm print. There was only one downside to it, I had to work with batches. Otherwise shipping charges would drive up the price point per photo.
So, about a week ago, I said what the heck, let’s try some DIY photo printing. I currently own a HP Deskjet 5940 printer. It’s not a purpose built photo printer, it does however take a photo cartridge. So I picked up a random set a photo paper, and went to town. The beauty about HP printers are their Linux drivers (hplip), which almost fully support almost every Deskjet HP has ever made. Other printer manufacturers aren’t even in the same ballpark when it comes to supporting Linux. The hplib drivers for example fully support full bleed printing on my specific model.
Even though my printer did support full bleed printing, I expected to go through hell to get a Linux application to actually do full bleed. Boy was I wrong! When printing photos from F-Spot, an extra tab appears. There you can select “Full Page (no margin)” printing. Another option to consider would be “Fill”, as I’ve always cropped my photos to a 3:2 ratio, as this is the standard ratio for photos. The “Fill” option stretches your photo to accommodate the current paper size, which in Europe is A4, which is not exactly 30cm by 20cm. The stretch is hard to notice, and saves you from having to cut away the white borders. Then make sure you select “1200dpi, Photo, Full Bleed” mode on the “Advanced” tab. At last just hit “Print”, and sit back, wait for the print to come out.
When comparing my home prints with the online lab prints (from foto.com), I noticed the home prints produced more vibrant colors, but suffered from some subtle dithering. The lab prints have no visible dithering what so ever.
Satisfied with the quality my printer could produce (using genuine HP Vivera ink), I set out the try different kinds of paper:
All papers produced excellent quality prints. Personally I’m partial to a satin finish, and HP’s satin-matt finish is very coarse, I wouldn’t recommend it. Office Centre’s satin finish is excellent though.
But there’s always a catch. It’s called print permanence. HP’s Premium Plus paper (combined with HP Vivera inks) is rated to last a hunderd years by Wilhelm Imaging Research. Neither HP’s own plain Premium papers, nor Office Centre’s papers assert such a claim.
Funnily enough Wilhelm actually did a study on Staples Photo Supreme papers combined with Staples refill ink, which only lasted the equivalent of a couple of years in their tests. Wilhelm tests encompass both light and air based aging. Now which of these would be the proverbial red herring? Is the paper just fine, with the ink spoiling the results. Or are both substandard products?
After doing some research, light (UV) based aging mostly depends on the ink, and air (ozone) based aging mostly depends on the paper. Original inks from HP, and competitors like Epson, have seen substantial development regards to uv resistance, and should last at least a couple of decades, not withstanding excessive abuse.
HP and and other manufacturers produce paper to accompany their inks. But only their best papers get the hunderd years mark from Wilhelm. As far as I can tell paper can be divided into two categories:
That said, most papers are of the porous type, only a few are swellable, including HP’s Premium Plus line. Now I’m just bummed HP makes a crappy satin finish. My quest for a swellable paper with a good satin finish continues…
/nick
/msg nickserv register
/msg nickserv set hidemail on
/nick
/msg nickserv group
/nick
/stats pIf nobody is on duty, you can get a list of the staffers who could help you out.
/who freenode/staff/*
/msg nickserv identify
Most Ubuntu users are somewhat familiar with sudo. One of sudo’s security features makes sure your parent environment is cleaned before dropping downto root. Generally you want this! However I didn’t.
When running pure-ftpd with it’s password database in a nonstandard location, it’s possible to pass the PURE_PASSWDFILE and PURE_DBFILE variables to all of it’s binaries (including pure-pw). But obviously sudo think it’s all a bit too risky, and throws them away while executing pure-pw as root. Bummer!
Lucky for me, this is easily fixed. You can instruct sudo to keep specific environmental variables, like so (in /etc/sudoers):
Defaults env_keep=”PURE_PASSWDFILE PURE_DBFILE”
Defaults env_reset
The last month my website hasn’t been reachable, because my webhosting account expired. My hoster removed all my files, to make way for new customers. I was caught off guard, because the lamer I am, I never did make a proper backup. Luckily I did managed to backup my WordPress database.
The worst of it all was the fact, that I’ve had my own colocated machine available for some time now. Since I had to install everything again, I put the new Ubuntu LTS on my HP DL380 G2 server. Not wanting to clutter up my install with all the crap webhosting brings along, I went with OpenVZ, to virtualize/containerize my webhosting setup. My new setup uses Lighttpd instead of Apache, and thus far I’m loving it. I’m using XCache to accelerate PHP5. Besides WordPress I’ve also installed Gallery2. And with some fiddling, I got everything to look similar including most error pages and automatic directory indexing.
Woohoo! De foto’s zijn binnen. Mn verhuurder meldt wel dat er nog geen foto’s van mijn appartement zijn, maar dat dit appartement er heel erg op lijkt:

Now this is something quite cool: http://www.watstemtmijnraad.nl
It actually gives insight in whats going on in the city council, at least the topics they vote on and the results of each vote. Cool thing is that Groningen (where I live) is part of the pilot, so the topics are a bit closer to home. Besides seeing the things they vote for in the council you can also see what each council member actually voted. Enables you to judge that bastard you voted on last election.
I must say I am a bit dissappointed by most of the “votes” they do, it looks more then common that all council members vote the same. Gives the impression the votes are more of a formality then that they actually matter.
I think this project is absolutely tax euro’s well spend and I hope they will do this with more government bodies. Who knows the “government” might actually become transparent one day. Another step they could take is publishing upcoming votes (which would stimulate involvement from people outside cityhall before the vote is already passed).
Apparently we already had this for the parlement on http://www.politix.nl.
A couple of emails and comments got lost at some point and I’m late-responding to them. Most are about projects I blogged about but have not worked on since.
Eoin Hennessy has taken over GstRaopSink development. He actually got it up and running, and set up a git repository with the code.
I was also requested to publish the source code of the Nurikabe generator. The co-author, Vladimir Panteleev, was okay with it, so I uploaded the source code of the generator and half-done GUI with a GPLv3 license.
Yesterday, I bought a Pinnacle PCTV DVB-T Stick Solo 72e in the Fnac. I did some research in advance to make sure I bought a device compatible with linux. It works very well in (K)ubuntu 8.04, although not out-of-the box. You have to add the ppa of Martin Pitt to your sources and install v4l-dvb-dkms (see http://martinpitt.wordpress.com/2008/06/10/packaged-dvb-t-drivers-for-ub...). After the installation of v4l-dvb-dkms, you can plug in the dvb-t receiver, start kaffeine, scan for channels and start watching. It's that simple!
Some more information, including how to use the device with other players (e.g. mplayer), can be found on http://www.neduz.be/
These are the channels kaffeine found (in Leuven, Belgium):
TV:
een (VRT)
KETNET/CANVAS (VRT)
la une (RTBF)
la deux (RTBF)
la trois (RTBF)
Radio:
brf (RTBF)
Classic 21 (RTBF)
Donna (VRT)
Donna hitbits (VRT)
EURONEWS (RTBF)
Klara (VRT)
Klara continuo (VRT)
La Prem1ere (RTBF)
Musiq3 (RTBF)
Nieuws+ (VRT)
Pure FM (RTBF)
Radio1 (VRT)
Radio2 (VRT)
Sporza Radio (VRT)
Studio Brussel (VRT)
VivaCite Bxl (RTBF)
Met dank aan Stani voor het beeldmateriaal.
Hardy Heron: geschiedenis & vernieuwingen (Johan Van Dijk)
Ubuntu en opensource in het bedrijfsleven (Serge van Ginderachter)
KDE4: de innoverende desktopomgeving (Bart Cerneels)
Ubuntu: zakelijk perspectief (Sebastian Schauenburg)
Massaal foto's bewerken met Phatch 0.1 (Stani)
With the release of Xubuntu 7.10 “Gutsy Gibbon”, Xubuntu looks better than ever. However, it can look better still, with the breathtaking effects provided by Compiz. How would you like all your windows zooming out into little thumbnails to give you an overview a la Mac OS X’s Exposé? Or what about flipping through your windows Cover Flow-style (or Flip 3D-style, for that matter)? And then you haven’t even experienced the joy of your windows casting shadows on your desktop, or wobbling like jelly as you drag them!
And that’s just the tip of the proverbial iceberg as there are many more features for you to discover - after you’ve installed it using this guide :).
Note to users of 8.04: flotoonie and Ivotron report that this guide also works for Xubuntu 8.04 “Hardy Heron”.
Preliminary note: your graphics card should support it. Most cards from Nvidia and ATI are supposed to work, as well as some cards from Intel. Most likely you will need to enable the proprietary, non-open source drivers using the Restricted Drivers Manager in Applications->System->Restricted Drivers Manager.
You can check whether you system can run Compiz using Compiz Check.
Before we start, I should also note that Compiz has not made a stable (i.e. 1.0) release, and undoubtly you will experience bugs yourself. This could include the occasional crash, your window borders disappearing (you can get them back by pressing Alt+F2 and entering “emerald” or, if that doesn’t work, “xfwm4″), windows being black in their entirety, or even being thrown out of your graphical environment completely. Be aware of the risks, and don’t blame me if it breaks
.
A bit of history would be appropriate, so here goes. You can skip this paragraph if you already know what Compiz and Compiz Fusion are and just want to install them.
Developed within Novell (they bring you SUSE Linux) they released Compiz, a window manager with gorgeous effects to demonstrate their new XGL software which allowed better use of hardware and made these effects possible. Compiz became an independent project and kept adding astonishing new effects. As Red Hat (who bring you Red Hat Linux) developed AIGLX as an alternative to XGL, Compiz didn’t even need XGL anymore. A community formed around Compiz that made lots of useful and not-so-useful (but pretty) additions. One particular group of enhancements were not accepted into the main project and, being open source, a spin-off named Beryl that did include the enhancements was started. Beryl became very popular - perhaps even more popular than Compiz itself. However, both projects were dissatisfied with the duplicate work and found that they could settle their previous arguments. In a re-merge, most of Beryl’s plugins were made to work on Compiz under the name of Compiz Fusion. So now we have Compiz (or Compiz-core), the base system, with Compiz Fusion, which provides many additional, perhaps more experimental, plugins.
We will install Compiz as well as Compiz Fusion from the official software sources which will no longer pull along half of Gnome as it did in the previous version of Xubuntu.
A word of thanks goes out to Forlong who wrote a guide titled “How to install Compiz Fusion on Ubuntu Feisty - tutorial for advanced and/or KDE as well as Xfce users” - about the only guide that explains how to install Compiz on Xubuntu (up until now, that is
). Whereas his tutorial focus[es] mostly on terminal commands
I’ll explain it like I usually do - the graphical way, with loads of screenshots. Do use his excellent tutorial if you prefer using terminal commands. Be sure to note, though, that his tutorial is for version 7.04, so you’ll have to replace “feisty” with “gutsy”.
Note: If you rather copy and paste a command into a terminal window, use this: sudo apt-get install compiz-core compiz-plugins compiz-fusion-plugins-main compiz-fusion-plugins-extra emerald compizconfig-settings-manager
Fire up Applications->System->Synaptic Package Manager to install the required packages. First of all, we need compiz-core. This is just pure Compiz as opposed to the compiz package which pulls along half of Gnome. Then, of course, we need the plugins that take care of all the bling - don’t worry, you can select which plugins you want to activate
. We need the packages compiz-plugins, compiz-fusion-plugins-main and compiz-fusion-plugins-extra. Furthermore, you might like the application to draw the window borders, Emerald, instead of Xubuntu’s default xfwm4 (if you’re unsure, you’ll probably want it). If so, select the package emerald. Last but not least, we need an application to configure Compiz to be usable, so select compizconfig-settings-manager too.
Having selected them all, you can click Apply to start the installation.
Before you can run your newly installed Compiz, you need to configure it a bit. In order to do so, open Applications->Settings->Advanced Desktop Effects Settings.
Beneath the “Effects” heading, click Window Decoration. In the Command input field, enter the window decorator you prefer (emerald if you installed that, xfwm4 if not).
Well, that’s about it - let’s try running it!
Only one way to find out whether everything works as expected - run it! In order to do so, press Alt+F2, enter compiz --replace, then click Run. If everything works as it should, you should now see shadows around your windows!
Now I’ll just assume that it ran successfully and that you want to have Compiz run by default every time you login. I’ll cover two ways to do that.
Using the first way Compiz will replace your default window manager every time you login. This means that, when you log in, first xfwm4 is ran which will then be replaced by Compiz, so even though xfwm4 is started, it will then be closed again without being used.
For this method, you open Applications->Settings->Autostarted applications.
There, you click Add to create an entry with the following values:
compiz --replaceWell, actually, only the last entry really matters
Click OK and you’re done! The next time you login, Compiz will be started automatically.
So… You prefer the scary stuff? Well, it’s not that difficult, actually. You just press Alt+F2 and enter
gksudo "mousepad /etc/xdg/xfce4-session/xfce4-session.rc"
Basically, that opens the file xfce4-session.rc with root rights with the text editor mousepad.
In this file, all you have to do is replace:
Client0_Command=xfwm4
…with:
Client0_Command=compiz
(Thank Ubuntuforums user sisco311 for this one)
Do note that this makes Compiz default for all users, as opposed to the previous method which made it default just for you.
CompizConfig allows you to tweak a lot of the settings, which might be a bit overwhelming. Therefore you might feel the need for some sane defaults. Luckily, CompizConfig, in the Preferences menu, allows you to import and export profiles.
As you can guess, I’ve exported mine, so go and download it and Import it!
It might just be that it does not work for you - please say so using the comment form below, then I can share the solution with the world:
Applications->Settings->Autostarted Applications. If you used the more-difficult-but-better way you have to open that configuration file again (gksudo "mousepad /etc/xdg/xfce4-session/xfce4-session.rc") and replace
Client0_Command=compiz
…with:
Client0_Command=xfwm4
Note that this will not uninstall Compiz - it will merely disable it.
xserver-xgl.For those not having window decorations after following all the steps try first by removing the contents of the .cache/sessions/ folder as mentioned by Rob Hodge.
Then, on Settings->Settings Manager->Sessions and Startup, check that ‘Automatically save session on logout’ is disabled. Also, check that if you have the ‘Prompt on Logout’ option is enabled, when you actually log out, the checkbox that appears below the ShutDown, Restart, etc.. buttons isn’t checked.
What happens is the following. If you like (as I did) to save your session so that the next time that you log in all the programs you had running appear again, this will also include the autostarted (from the xfce4-session.rc file) compiz. Then, when you log out and log in again, the XFCE session manager will try to run compiz twice (one from the xfce4-session and another from the last session), causing (at least that’s what happens to me) that the emerald window decorator never gets started (or something alike like killed by the –replace flag).
So, the conclusion. Follow all the steps, stop saving sessions and use the autostarted applications configuration instead.
sudo nvidia-xconfig --add-argb-glx-visuals -d 24 and pressing “Run”. With thanks to Ransom’s comment.General Options->Desktop Size in the Cube settings.i couldn’t get it to work as the default setup.. it kept loading xfcewm instead of compiz or loading no window mqanager at all. so i”d sometimes be left with no decoration as the major noticable effect. this was even after changing the xfce4-session.rc file.
He solved it by opening a terminal window (Applications->Accessories->Terminal) and typing:
rm ~/.cache/sessions/*
WARNING: After pressing Enter, this command will remove your saved session (i.e. the state saved if you checked “Save session” on logging out previously). If you don’t know what I’m talking about then it’s probably no problem.
A run down of what I did was first
installed all the apps I needed:
sudo apt-get install compiz-core compiz-plugins compiz-fusion-plugins-main compiz-fusion-plugins-extra emerald compizconfig-settings-managerI removed nvidia-glx / nvidia-glx-new as they directly conflicted with my nvidia drivers, and put me into “Low Graphics Mode” and caused all sorts of issues with the xserver.
sudo apt-get remove nvidia-glx –purge
sudo apt-get remove nvidia-glx-new –purgerespectively.
installed metacity:
sudo apt-get install metacityrestarted the computer (this is key)
then made sure I had a fully functioning xorg.conf that I created from mish-mashing the generated
configs from the following commands:
sudo nvidia-xconfig
sudo dpkg-reconfigure -phigh xserver-xorg
nvidia-settingsand everything was working graphically, and I was using the restricted drivers, with nothing was crashing.
Then I added these entries to my xorg.conf
Section “Extensions”
Option “Composite” “Enable”
EndSectionand
Option “AddARGBVisuals” “True”to the Device section
I then reinstalled the nvidia drivers
sudo nvidia-installer -f
-fforces the install, when the install asks you if you want it to generate and xorg for you SAY NO! (You just spent a lot of time creating a working one)then restarted the computer again.
it’s still a bit finicky as I had to run it twice to get it to work, and afterwards I can’t switch back to xfwm4 but it’s I small price to pay.
UPDATE: I’ve since uninstalled metacity, and everything seems to be working great
Of course, you can always read the comments for this post to read everybody’s problems/solutions or general tips.
Just because Xubuntu is speedy doesn’t mean it should not look pretty. With the release of 7.10, finally Compiz is no longer exclusively Ubuntu’s. Enjoy the looks!

Wat een gedoe, even een pasfoto maken voor m’n visum aanvraag, allemaal regeltjes en gedoe. Sowieso is heel die visum aanvraag veel gedoe, ik heb ondertussen een berg documenten bij elkaar gespaard, die ik donderdag allemaal mee moet nemen om de visumaanvraag in te kunnen dienen. Dat moet persoonlijk, op het consulaat, in Amsterdam. Dan krijg je een gesprek, wordt de hele reutemeut ingenomen (inclusief je paspoort), en krijg je dat (als het goed is tenminste), enkele dagen later per aangetekende post teruggestuurd, ik hoop maar dat alles goed gaat.
Anyway, pasfoto’s. De fotograaf wilde het vandaag zelf niet doen, omdat ze dat “niet kon doen” (lees: geen zin in had). Dus zelf maar even gedaan, en zie hier het resultaat:

Volgens mij klopt het best aardig ![]()
There are many things to do about search engine optimization (SEO in short). Nothing wrong with this in general, especially if you look at the technical part. Since this topic came up in the office last week: in short my opinion about the whole topic.
The scam part
Many “marketing” companies built a very lucrative business around it. Offering the services to “buy yourself into the google rankings”. Some really dare to charge insane amounts of money for it as well. I heard numbers from 600 euro a month to 7000 euro a month.
You can expect that these costs do not include any work to modify your website, which is the part that really matters. But more to that later.
In the old days they had all kinds of websites running with links, often not visible for normal surfers but kindly presented to visiting search engines. This misleading of search engines worked for a while but got punished by often complete removal from the search results for the sites in question. This proces repeated itself with different techniques, but the result is always the same. My advice on this part is to just play fair: saves you energy, saves you money, saves you being removed from search results.
Nowadays I would expect these companies to be very careful with the techniques they use to promote websites besides optimization of the websites itself. Being bad might vapourize their whole business but since the popularity of short term vision I would not put my hands in the fire for it.
You could guess I am not really fond of these companies which just sell search engine optimization like its some kind of magic. For a lot of money nonetheless. Maybe one has a better story then the other (also depends on the listener) but I think the bottomline is you get little for what you pay. At least the fact that I regularly hear people which had very bad experiences and not yet any which had good experiences with such marketing companies should say something.
The technical part
The part that enables search engines to find you better. Actually it quite boring in a technical sense since it is not much of a challenge (no matter what they tell you). It is mostly about how the information is presented. A short list:
I would recommend taking this list to your webdeveloper and talk about the above items and see if they can implement it before going even thinking about the scamming part. My personal opinion is that this should largely already been taken care of if you are working with professional webdevelopers but it is not exactly the standard.
The key
As with most technical things, it just facilitates. Where it is all about in the end is the content. If you have virtually no content or it is just very shabby you won’t be found.
So yes you actually have to write good texts and put things on your site that people actually want to find. What helps when writing is that you use the words in your text that people search for and let these words recur in your site.
Conclusion
Making sure that the technical part is in order helps and if you have the good stuff, people will link to it and you will boost in the rankings.
If you have a strong desire to burn more money and push more aggresive I would suggest just buying google adwords instead of what I discussed in the scamming part. Since this at least gives you fancy graphs of your burned euros (also it can be measured much better and adjusted/influenced by yourself continuously).
Ik dacht al dat mn appartement in Boston, dicht bij de nieuwe Apple store was, maar dit is helemaal briljant:
Niet goed voor de portomonnee, vermoed ik ![]()
I’m potentially interested in buying the Zalman ZM-NC2000 to cool my laptop. Does anyone have this laptop cooler ? If so could you please do me a big favor and do some measurements for me ?
I would like to know the two distances which I illustrated in the picture (the red distance and the yellow distance). The red distance is important because I want to know whether the air can blow directly into the air intake for my cpu. I need an exact measurement for this because the ZM-NC1000 was too small for this.The yellow distance is important because I don’t want too much air to escape at the sides. Exact measurements are also important because I need to convert it to the metric system.
Thank you very much in advance!


Mijn echte naam is Frank Erens, maar de meeste mensen op internet (tenminste, in de communities waar ik actief ben) zullen me kennen als SeySayux. Uiteraard mag je me ook met 'Oh heerser over ons nietige stervelingen' aanspreken ;).
Ik ben geboren in 1993, dus dat betekent dat ik nu 14 jaar ben.
In België, in Genk. Dat is vlak bij Hasselt voor diegenen die het niet weten. Altijd handig voor de Belgische releaseparty dus.
Normaal gezien zou ik nu moeten zeggen dat null pointers nooit gedereferenceerd mogen worden, maar goed. Ik zit momenteel in het derde jaar ASO (Nederlanders: dit komt overeen met VWO), richting Wetenschappen. Dat betekent dat ik van 8.15 tot 15.50 weg ben (gaan en terugkomen meegerekend). Verder, als je 'Ubuntu' kan veralgemenen tot 'Linux' of zelfs 'computer', doe ik niet veel. Na dat ik gestudeerd heb, start ik direct m'n computer op en werk meestal aan een van m'n projecten. Sylphase zullen jullie vast wel kennen, verder werk ik nog aan een spel, genaamd Seoyan Realms, een fantasy-themed MMORPG in Java. Daar is nog maar een kleine beginlaag van klaar (in verhouding nog minder als van Sylphase), de map editor, die het mij dus in staat moet stellen eenvoudig kaarten toe te voegen, is nog eens niet klaar. Een geluk is er wel, namelijk dat de meeste elementaire dingen, zoals het laden van gegevens en het weergeven van deze, makkelijk herbruikt kunnen worden. Momenteel ben ik aan een soort virtueel-mappensysteem bezig, waarmee tar.gz archieven met gegevens dus gemakkelijk kunnen worden ingeladen.
Pfft... De wereld is nu al één grote knoeiboel... Oorlogen, hongersnood, milieuvervuiling, overpopulatie... Veel goeds valt er niet meer te doen... Als het echt moet, weet ik nog iets: de mensheid moet meer bewust worden van het bestaan van Linux.
Mijn eerste contact met Linux was toen mijn vader er mij op attent maakte dat Linux gratis was, want ik had er al van gehoord, maar dat was er ook (dank je wel, papa!). Ik heb eerst wat zitten rommelen met Knoppix. Toen wou ik een volledige Linux-installatie, en heb dus maar m'n ouwe bak die een kruising tussen Windows 2000 en Windows NT 4.0 draaide (het systeem wist zelf niet goed wat het was) bovengehaald en heb er Debian op geïnstalleerd. Toen heb ik dadelijk pakken over de command line geleerd, want de grafische interface wilde niet bollen. Een tijdje later zag ik op school een poster hangen van www.linux-service.be – de hele school hangt vol met Linux-posters, en toch gebruiken we zelfs nog eens geen Firefox – en heb dat eens bezocht. Daar stond een filmpje van XGL met Compiz, ik had dat bekeken en wow! Dat moest ik uiteraard ook hebben. Gepruld met Debian (die nog eens geen fatsoenlijke grafische interface had) om Compiz te draaien, ging niet. Een paar maand later (en tal van compiz-filmpjes en hoop naar het onbereikbare) ging ik nog eens opnieuw proberen. Ik zag toen toevallig dat Compiz oorspronkelijk van openSUSE kwam – ik dacht: “Hey, misschien werkt het met SUSE beter?” Dus dat maar afgehaald, en geïnstalleerd, en wow! Dat was wel wat anders als Debian! Ik stond werkelijk versteld dat ik hier iets had dat op Windows leek... Want als niemand het gebruikt, kan het toch nooit zo goed zijn, redeneerde ik. Ik heb dus een tijd lang SUSE gebruikt. Op een dag wees mijn vader (alweer) mij op een artikel over Ubuntu 7.04 in Het Laatste Nieuws. Ze zeiden daar dat deze versie de eerste was die een volledig alternatief voor Vista bood. Ik, die SUSE toch niet hét van hét vond, wilde dat dan maar eens uitproberen. Eerst de server versie, want ik was eigenlijk een server aan het maken, en dacht dat een versie speciaal voor servers beter zou zijn. Die werkte eerst maar half-half, en toen ik de grafische Kubuntu had geïnstalleerd om toch grafisch te kunnen werken was dat ook maar niets... Later heb ik het terug opnieuw geprobeerd, eerst met de Gnome-versie, daarna met de KDE versie, en na 2 versies verder te zijn (nu bij 8.04) wil ik niets anders meer. Ik heb SUSE nog eens geprobeerd, maar vind het toch nog niet zo goed als Ubuntu.
Na het vorige epistel, nog eens een epistel... We zullen maar beginnen zeker? Vroeger had ik een andere username, maar die vertel ik liever niet. De kans bestaat dat er mensen zijn die zich mij herinneren, en nu ik mijn woonplaats en naam heb gegeven, tja... hoe zal ik het zeggen... Ik wil niet graag vermoord worden ;) . Wel, ik had die dus ook geregistreerd voor een online spel. Op een bepaalde dag besluiten die van dat spel om iets aan hun servers te veranderen, en opeens werd mijn wachtwoord als 'zwak' gezien, en kon ik niet meer inloggen en ik kon het ook niet veranderen. Ik moest dus een nieuw account registreren. Ik had in die tijd 'Seyan Sayux' als schuilnaam bedacht, het was ook een personage in de mod waar ik aan het werk aan was. Ik dacht dus “Okee, laten we Seyan Sayux gebruiken”. Peeeut! Ik mocht maar 8 letters gebruiken. Ik heb het dus afgekort tot SeySayux, en dat gebruik ik nog tot de dag van vandaag. Let ook erop dat de tweede S ook een hoofdletter is. Daarom speel ik niet graag Runescape: die denken dat het grappig is om alle eerste letters van een woord hoofdletter te maken en de rest kleine letter. Ik heet daar dus Seysayux i.p.v. SeySayux. En dat ergert me.
Dat hangt er van af. Op sommige dagen heb ik veel schoolwerk. En in het weekend heb ik natuurlijk meer tijd als door de week. Als ik er een gemiddeld cijfer op moet plakken, 2 à 3 uur door de week, 5 à 7 uur in het weekend. Wat mij het meeste boeit is het feit dat je met een computer heel mooie programma's kan schrijven, en dat je dankzij toolkits als Qt en game-engines zoals jME (3d-engine in Java, open-source, crossplatform) daar nog eens niet veel werk aan hebt. Wat mij het meest ergert is een computer die crasht net terwijl ik iets belangrijks bezig ben. Ik ben al vaak data verloren hierdoor, ja ook op Linux. En dat die verdraaide Screenlets nooit op hun plaats blijven zitten na een herstart, uiteraard.
Ik zorg voor het amusement, maar verder? Ik heb al wat suggesties gegeven op Brainstorm, ik heb ooit eens geprobeerd om iets te vertalen op Rosetta, maar dat ging er zo belabberd aan toe (geen zoekfunctie, geen eenvoudige “geef onvertaalde delen weer”, altijd maar op “next” klikken en dat gaat zo traaaaag... Ik ben nu aan het leren programmeren in Qt, dus hoop ik dat ik in de toekomst programma's voor Linux kan gaan schrijven.
Als ik heel eerlijk mag zijn, vind ik Ubuntu, of Linux in het algemeen, nog helemaal niet klaar voor het grote publiek. Veel dingen, zoals die FHS (mappen zoals /bin, /boot, /usr ipv voluit gespelde namen zoals /System) en /etc/fstab, /boot/grub/menu.lst en /etc/X11/xorg.conf zijn feitelijk al lang voorbij gestreefd. Ik heb veel ideëen voor vervanging van deze dingen op Brainstorm geplaatst. Ook dat als je iets als root wilt doen, of een schijf wilt aankoppelen, dit al direct via de terminal moet doen, vind ik niet goed. En de UI die gebruikt wordt, is al zo oud (of tenminste op een heel oud principe gebaseerd), ... Ook heb ik de laatste tijd gemerkt, dat doordat de ontwikkelaars zichzelf dwingen iedere 6 maanden een nieuwe release uit te brengen, er vaak mankementen en haperingen in zijn. Feitelijk zouden er enkel LTS versies mogen zijn zoals nu, en zou er om de 6 maanden een 'beta' versie moeten uitkomen, in plaats wat nu echte versies zijn. Sylphase is feitelijk hetgene wat ik in Ubuntu wil zien, maar wat, zelfs nadat verschillende mensen het hebben voorgesteld, de ontwikkelaars niet in Ubuntu willen. Op dat punt vind ik de Linuxwereld een beetje te conservatief.
Ze maken mij er een beetje belachelijk mee, eigenlijk. Kijk daar hebt ge hem weer met zunne Linux. Of keigrote Windows-logo's op het bord tekenen en het inloggeluidje van Windows nadoen. Maar ik moet toegeven dat ik er zelf ook soms flauw en opdringerig in ben geweest (de Tux was toch groter!). Ik heb wel een vriend (die ik al 2x naar de releaseparty heb meegenomen) die ook Linux wilt gebruiken, maar zijn wireless doet het niet helemaal en ik ben er nog niet toe gekomen dat in te stellen, en dus gebruikt hij het eigenlijk niet, want zonder internet is hij niet veel. Het forum is veel voor mij, want dan kan ik eens met mensen praten die mij niet aankijken alsof ik van Mars kom als ik 'kernelcompilatie' zeg.
Hier heb ik even over nagedacht, maar ik heb dan toch een gezegde gevonden: “Er zijn maar twee dingen oneindig: het heelal en de menselijke stomheid. Alhoewel, van dat eerste ben ik niet zeker” - Albert Einstein.
Hier heb ik eventjes over nagedacht, maar ik denk dat het deze keer Stani moet worden. Mits hij wil natuurlijk.Hij heeft een boeiend verhaal te vertellen dat niet alleen maar over Phatch gaat. Buiten Phatch doet hij nog veel meer met computers en internet. Misschien wil hij daar wat meer over vertellen?
Ai, moet ik weer nadenken. Ik heb maar een keer de kans, dus moet ik direct een goede, en moeilijke vraag stellen... Ik weet niet direct iets wat ik van jou wil weten, dus zal ik maar voor het volgende gaan: wat zou er volgens jou gebeuren moesten Richard Stallman en Steve Ballmer in dezelfde kamer gezet worden voor een debat? (Je mag je fantasie de vrije loop laten gaan – uiteraard zijn er genoeg vrije stoelen aanwezig).
[Warning: very opinionated content]
I’m so glad that my girlfriend bought her weddingdress a few weeks ago. Right now a building next to the weddingdress shop is burning down and the smoke is blowing over it, probably ruining all of the dresses. It was already hard to find an affordable, beautiful dress, this surely would have made it harder.
The people of Spread Firefox want to get Firefox in the Guinness Book of Records as "most software downloads in 24 hours." Although firefox is included in ubuntu, I have pledged to download firefox on the release day. Just because it would be cool to have a free software product in the Guinness Book! Especially, because firefox is such a good browser...
Spread the word!
Yesterday was the first meeting of the Ubuntu EMEA membership board and I think it was a great success. We managed to process 13 membership applications,10 people were accepted as Ubuntu members. This is a huge improvement for prospective members who now do not have to wait for the Community Council to meet, but can turn to local membership boards. So there are now 3 ways to become Ubuntu member:
There are now 378 Ubuntu members, that is 378 people who made significant contributions to Ubuntu and the Ubuntu community. There are many more of you out there who make such significant contributions, so this delegation will make sure all those contributions will be recognized!
I've just returned home after spending a week in Prague, where I went to the UDS Intrepid. As usual, it was great! As I'm too tired to write a lot about it, I'll try to sum it up in a pictures.
On Monday the week was opened by Jono, who explained how this UDS would work. As always, it was a bit different from the previous ones, to improve and perfect the UDS experience.
During the day we discussed improvements for the next version of Ubuntu (the Intrepid Ibex) and the community processes, in evenings we had super-cheap dinners at all kinds of restaurants. There even was music afterwards!
The week ended with a party at the "XT3" club, where the Canonical band played a few songs before DJ Holbach took over.
Video of the band playing Whiskey in the Jar (about 52MiB)
More pictures: Day 1, Day 2, Day 4, Day 5, Day 6 (sightseeing in Prague)
Yesterday I spoke about “Ubuntu in the office” at the Ubuntu-NL release party. I put the slides online (Dutch), so if someone wants to read back its possible.
I had the feeling the party was quite successful. In the workshop area everything seemed quite active and downstairs in the speaker area it was also quite lively. Combined with a pretty good atmosphere I think everyone can look back as time well spend.
In any case: Thanks to Matthijs and the others who organized the event, well done!
ps. Is there any official visitor count? Pictures online somewhere?
Het probleem bestaat al enkele jaren. Je wil een paar kde programma’s onder gnome gebruiken. Hoogst waarschijnlijk zijn deze binnenkort opgelost.
Trolltech werkt aan een qt style die gerendered word met gtk. Hierdoor kunnen qt programma’s beter integreren in de gnome desktop.
Ik heb het juist even zelf gecompileerd en het werkt eigenlijk goed.
Linkje: http://labs.trolltech.com/page/Projects/Styles/GtkStyle
Een voorbeeldje:
Spijtig genoeg is deze feature alleen beschikbaar voor qt4 programma’s. Maar er is dus hoop voor de toekomst.
Yesterday evening I had the pleasure to pick up the following three security notices:
I can tell you these are really not funny. They really generate a lot of work indirectly. Annoying but doable are things like regeneration SSH keys. The PITA situation is with OpenVPN, looks like we have the push new keys out to all the clients in a few setups. That really deserves a curse or two.
As a special bonus:
Once the update is applied, weak shared encryption keys and
SSL/TLS certificates will be rejected where possible (though
they cannot be detected in all cases). If you are using such
keys or certificates, OpenVPN will not start and the keys or
certificates will need to be regenerated.
Which means I am happy to read security notices. Just updating might result in a broken setup.
If anybody could give extra information on how weak those keys actually are and how easy they are to crack, I would be delighted. In the meanwhile, looking at the amount of servers, I guess I can schedule a teambuilding event where we can mass regenerate keys.
ps. I can tell you I’m quite happy that our backup machines which use SSH+RSYNC for automatic incremental backups are not vulnerable.
Woohoo! Here we go! 1st of July untill the end of September I will be working at IDG in Boston, MA! For now I need to arrange a lot of stuff, visa, insurance, tickets, and I don’t know any other details as of yet, but I’ll keep you posted
Akke Hoekstra
Zoiets vraag je niet aan een dame...... maar goed, uh..... nog net aan de goede kant van de 50.
Hoogeveen. Een van de meest boeiende plekjes in Nederland dus. En dat niet alleen. Ik woon volgens Balkenende ook nog in een voorbeeldwijk voor heel Nederland. Altijd fijn om zoiets te horen van iemand die zicht op zulke zaken heeft.
Ik zit alweer een dikke tien jaar in de bijstand. Daarvoor was ik als theoloog op wieletjes in dienst van het provinciale bureau van de Gereformeerde Kerken en van daaruit betrokken bij verschillende projecten voor mensen aan de rand van onze samenleving. Werd indertijd niet alleen gezegend met een pracht van een tweeling maar ook nog met een behoorlijke bekkeninstabiliteit. Niet echt een ideale combinatie met het werk wat ik deed. Vandaar dan ook dat ik gestopt ben met werken. Ben inmiddels wel weer zo'n beetje uitgerevalideerd en nu langzaam maar zeker aan het re-integreren. Ik geef les op een ROC aan zowel autochtone als allochtone laaggeletterden en ik werk daar met jongeren die door wat voor omstandigheden dan ook zo in de knoei zijn gekomen dat ze nog niet genoeg niveau hebben om mee te draaien op het ROC. Het is prachtig om te zien dat mensen van wie je denkt dat ze volledig kansloos zijn toch weer, met wat duw en trekwerk, soms, op de rails te krijgen zijn. Verder lijk ik wel een taxibedrijf voor mijn moeder en mijn kinderen pfffff, schrijf ik af en toe eens wat stukjes over het leven enzo in een plaatselijk krantje, mag ik me graag bemoeien met zaken rond zorg, welzijn en politiek in mijn buurt, en probeer ik sinds twee jaar optimaal profijt te trekken van de klimaatverandering. Mijn tuin staat vol met kiwi's druiven, olijven en vijgen. Vermoedelijk wordt dit het jaar waarin de eerste chateau del Hoogeveensevaart gebotteld zal worden. Kom maar op met die CO2! Wezenlijk heb ik het structureel te druk. Ik weet dat ik het mezelf aan doe. Het bloed kruipt altijd waar het gaan wil.
Ik zou graag zien dat mensen elkaar minder snel afschreven. Van mij hoeft de wereld niet zo hard te zijn. Ik weet dat mensen heel diep kunnen zinken, maar ik weet ook dat ze vaak nog ver kunnen komen. Maar je moet ze wel de kans kunnen/willen geven. Ik beweer niet dat alles maar moet kunnen. Daar geloof ik niet in. Er zijn grenzen. Kansen. Daar geloof ik in. (whaaah.... het lijkt wel alsof ik een speech voor Verdonk schrijf, met al die korte zinnetjes... ) En ja, nu ik het toch over Verdonk heb, ietsje kritischer mag het van mij allemaal wel worden. Wat mij betreft hoeft er niets voor zoete koek te worden aangenomen. Nooit. Ik ben dan ook erg blij met de jongeren die we op het forum hebben en sta er versteld van dat ze al zo jong hun keuzes hebben gemaakt. Niks is zo moeilijk als een onorthodoxe keuze. Maar misschien is ook wel niks zo boeiend.
Ik gebruik Ubuntu alweer een kleine twee jaar. Dat ik eraan begonnen ben, is vooral de schuld van mijn zoon die als 9/10 jarige vol enthousiasme alle uithoeken van het wereldwijdeweb aan het verkennen was. Het leek alsof er aan de reeks virussen op mijn computer geen einde meer kwam. Ik had mij in een vlaag van acute wanhoop al eens een Suse-cd laten aanpraten, maar na het bekijken van verschillende Suse-fora sloeg de angst mij dermate om het hart dat ik het zelfs niet eens aandurfde die cd uit het doosje te halen (hij ligt inmiddels ongeopend en wel op zolder). Toch bleef het Linux-verhaal ergens op de achtergrond wel in mijn hersenpan opgeslagen. En toen ik dan in Computeridee een leuk verhaal over Ubuntu las, heb ik eerst wat rondgeneusd op dit forum (veel leuker dan alle Suse-fora bijelkaar), een cd bij Dennis besteld, die in de computer geduwd en ziedaar, vrijwel alles deed het. Op de webcam na, maar goed, dat was geen breekpunt voor mij. Met de stevige steun in de rug van het forum kan ik gewoon dat met mijn computer doen wat ik wil: surfen, schrijven en mailen. De rest boeit mij niet. Ik hou helemaal niet van computers. Ze moeten het doen. Net zoals mijn auto.Ondertussen besteed ik wel veel meer tijd aan de computer dan in ons Windows-tijdperk. Bestreed ik vroeger vooral virussen, nu probeer ik jullie een beetje in het gareel te houden. Eigenlijk een baantje van niks want het Ubuntu-volk is behoorlijk gedisciplineerd.
laacque? Ach, tegenwoordig moet je jezelf profileren, op de kaart zetten en wat al niet meer om belangrijk te wezen. Ik heet gewoon Akke. Niet meer en niet minder. Ik heb er maar La voor gezet en de zaak op z'n Frans gespeld. Volgens Profox ben ik Friens: een wonderlijke mix van Fries en Frans, dus eigenlijk ben ik Belgisch.
Met de computers hou ik me helemaal niet bezig. Behalve wanneer ze kapot zijn natuurlijk. Dan breng ik ze naar de reparateur. Ik ben een uur of drie vier per dag online, lees een ontiegelijke hoeveelheid aan kranten, spam een beetje op Fok!, hou bij wat er zoal gebeurt op het gebied van voeding/gezondheid. Het meeste boeit mij de interactie tussen mensen. Ik vind het werkelijk geweldig dat ik via internet contact kan hebben met mensen aan de andere kant van de wereld, kennis en ideeën kan uitwisselen. Ik erger mij het meeste aan mensen die weigeren na te denken en ongefundeerd maar wat lopen te schreeuwen. Holle vaten daar kan net zoveel mee als met gebakken lucht.
Ik ben moderator en lid van het Ubuntu-nl team. In die functies lijd ik heel wat af. Nou ja, niet echt dus. Met enige regelmaat lig ik in een deuk. Eigenlijk is het gewoon een leuke klus. Met een boeiend team. Ook al is het met al die verschillende persoonlijkheden niet altijd gemakkelijk. Ik vermoed dat ik nog wel even blijf. Misschien wel tot morgen ; )
Niks wezenlijks. Naast dat Ubuntu heerlijk op mijn desktopjes draait, voel ik mij nog steeds erg aangesproken door de onderliggende visie die door Tutu zo treffend is omschreven; “Ubuntu is the essence of being human. And in our language a person is ubuntu, and ubuntu is a noun to speak about what it means to be human. In essence, it is something that you find especially in the Old Testament, where you’re not quite sure sometimes-when you are reading, say the Psalms-whether the Psalm is speaking, where it says, ‘I,’ only of an individual, or is it speaking in a corporate sense? We say a person is a person through other persons. You can’t be human in isolation. You are human only in relationships. We are interconnected.”
Tja, ik moet me natuurlijk vreselijk onderdrukt en eenzaam en onbegrepen voelen maar dat is niet zo. Ik voel me thuis op dit forum. Ongeveer net zo thuis als wanneer ik op het Astron rondloop. Er zit iets van verwondering bij en iets van respect, iets van o jeeee dat dat allemaal kan en paaah.. interessant. Zoiets heeft vermoedelijk niet veel met gender-toestanden te maken maar alles met het nest waaruit je bent gekomen. Ik neem aan dat ik nog jarenlang in therapie moet voordat ik jullie niet meer leuk vind. Het grootste probleem wat ik tot nu toe met Ubuntu heb gehad en de oplossing daarvan. Mijn meest stresserige probleem met Ubuntu was niet een Ubuntu-probleem maar is wel door het forum opgelost. Ik moet nl. tot mijn schande bekennen dat ik nog steeds een dualboot draai. Voor deze afvalligheid ben ik dan ook gestraft. Bij een reinstall van XP brak mijn cd in de cd-romspeler. Goede raad was goedkoop. Ik ben door Gandy gered. Weet nog steeds niet of de oplossing wel helemaal voldeed aan de juridische eisen van Microsoft maar veel zal het niet schelen, hoop ik.
En ach, de liefde.... wat is het toch allemaal ingewikkeld of wat maak je het ingewikkeld, soms. Mijn vader is een paar jaar gelden overleden en sinds die tijd is mijn moeder volledig uit balans. Hieronder een gedicht van Bart Moeyaert, een Belgische dichter, vooral niet te verwarren met bartek, ook een poeet maar dan heel anders.
Sterk
Ik dacht dat het niet kon: dat iets wat je niet ziet je alle dagen draagt en sterker maakt. Alsof je spieren krijgt van liefde.
En kijk, het klopt: het hart van oma slaat nog altijd over als ze opa ziet. Maar nu hij oud is en te bed, misschien nog net de hemel haalt, loopt oma sinds een poosje krommer en vraagt ze vaker om mijn arm. Zonder hem krijgt ze het huis niet warm en zelfs de hond zakt zuchtend naast de luie stoel. Dus het is waar dat liefde spieren geeft en op den duur ook vuur.
De volgende Ubuntero moet Seysayux worden, niet alleen omdat hij mij zo schandalig heeft omgekocht , maar vooral omdat ik veel respect heb voor de manier waarop hij zich ontwikkelt op het forum. Nou ja, afgezien van dat eeuwige Mac-gedoe natuurlijk maar dat vergeef ik hem hierbij.
Begrijpen de jongeren van jouw leeftijd eigenlijk wel wat jou zo boeit in Ubuntu? Of sta je er wat alleen in? En wat betekent een forum als het onze voor jou?
Xubuntu 8.04 is out! This release, along with those of Ubuntu, Kubuntu and whatnot, means that the Ubuntu servers are going to have a hard time with everybody and their stork downloading these new releases at the same time. Being the good open source citizen that you are, you are probably more than willing to take some of the load. Loo